Hunter Genuine Universal Ceiling Fan Remote Receiver, Green K8032

Genuine Original Hunter Replacement Wireless Remote Receiver for Ceiling Fans. (These are found in "new platform" fans sold from 2013 on)Operates fan speeds, instant fan "Off," and fully dimmable light operation. Rated for fans at 1.0 amps and fan lighting at 50 watts. Receiver fits in fan canopy.  Replacement for damaged or defective wireless receiver Receiver only (wireless remote/transmitter not included) Part # K8032O1000 must match part # of your current receiver (found on sticker as the back as shown in photo) FREQ:  434MHz G: 1.9 Pairing Instructions: Note: The remote must be paired to this new receiver before the fan will operate. Turn off the breaker that powers the fan.  Leave power off for 1 minute and then turn back on. Within 3 minutes, press the pair button on the remote (inside the battery compartment). If pairing was successful, a single beep will sound. Replace the battery door. If it does not beep, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan. If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly.